# Delamination: what a fix costs and what a quote hides

> Patching delamination costs $300 to $800; a chip-out and replaster is $5,500 to $10,000, or $6.43 to $11.70 per square foot. Why bond coats look cheaper.

Canonical: https://poolresurfacingguide.com/delamination-cost/

Last updated: 2026-11-09

Delamination repair costs **$300 to $800** for a small patch and **$5,500 to $10,000** for a chip-out and replaster, which is $6.43 to $11.70 per square foot on an 855-square-foot pool. A bond coat quote at $4,000 to $9,000 sits between them, and the difference is almost entirely whether the old finish comes off.

## The price by method

| Method | What happens | Cost |
|---|---|---|
| Spot patch | Cut back to sound, fill, cure | $300 - $800 |
| Bond coat and replaster | New finish over old | $4,000 - $9,000 |
| Chip-out and replaster | Old finish removed to shell | $5,500 - $10,000 |
| Quartz over chip-out | Aggregate finish | $6,000 - $12,000 |
| Pebble over chip-out | Exposed aggregate | $8,000 - $15,000 |
| Shell repair | Cracks, rebar, hollows | $500 - $3,000 |

The two replaster rows produce the same visible result and a different expected life. That is the whole pricing question in delamination work.

## Per-square-foot arithmetic

On the 855-square-foot interior used across this site:

- $5,500 ÷ 855 = $6.43 per square foot
- $8,000 ÷ 855 = $9.36 per square foot
- $10,000 ÷ 855 = $11.70 per square foot

A bond coat at $4,000 is $4.68 per square foot, and at $9,000 it is $10.53. The overlap is why the two methods cannot be compared on price alone: a bond coat at the top of its range costs more than a chip-out at the bottom of its.

Compare the preparation line, not the total. A $4,000 bond coat and a $6,000 chip-out are not the same job at different margins.

## Why the chip-out costs more

Three additional costs: removal, disposal, and shell work.

Removal is pneumatic breaking of the old finish across the whole pool, which is slow and labour-heavy. Disposal is the debris, which has to be hauled and tipped. Shell work is what the removal exposes: cracks that were hidden, rebar that has corroded, and hollows that need filling before the new finish goes on.

That third item is the one that surprises owners. A pool can look sound from the water and reveal three cracks once the plaster is off. The quote should state how shell repair is priced, whether it is included up to a limit or billed as found.

## What a cheap quote is actually selling

A bond coat at $4,000 on a delaminating pool is the most expensive mistake in this market, because it fails in one to three years and takes the new finish with it.

The tell is in the assessment. A contractor who taps the surface, marks the hollows, and explains what a bond coat can and cannot do is selling a method. A contractor who quotes without tapping is selling a price.

Ask one question: what happens if the old plaster is not bonded? A good answer describes a chip-out. A bad answer describes a primer.

## Per year, and what else lands on the invoice

Divide the installed price by the expected life and the comparison changes shape.

White plaster at $5,500 over 12 years is $458 per year, and at $10,000 over 7 years it is $1,429. Quartz at $6,000 over 15 years is $400, and at $12,000 over 10 years it is $1,200. Pebble at $8,000 over 20 years is $400, and at $15,000 over 15 years it is $1,000.

The pattern is consistent: the cheapest surface has the widest per-year range, because the low end of its price depends on a preparation that the low quote may not include. That is the argument for reading the scope before reading the total.

- **Waterline tile.** $1,500 to $5,000, and the right time to replace it.
- **Coping.** Priced per linear foot, often excluded.
- **Water.** Drain-down and refill at $150 to $400.
- **Startup chemicals** and the first month of balancing.
- **Deck protection and repair** where access crosses the deck.
- **Pump-out** where the pool cannot drain by gravity.

A quote that includes tile and one that excludes it can differ by $3,000 without either being wrong.

## The cost of delaying

Delamination spreads. A hollow that is patched for $300 to $800 this year becomes a wall that needs a chip-out at $5,500 to $10,000 in three, because water behind the edge opens the bond further with every drain cycle.

The arithmetic is the same as most water damage: the small repair is cheap, the large one is not, and the interval between them is shorter than owners expect.

## Five steps to price the job

1. Tap the whole surface and mark the hollow areas.
2. Measure the hollow area as a share of the total.
3. Under 10 square feet and isolated, price a patch.
4. Over a wall or floor, price a chip-out.
5. Ask how shell repair is priced if cracks are found.

Step five is the one that separates a fixed quote from an open-ended one, and it is worth settling before work starts.

## The short version

Patch small, isolated lifts. Chip out anything that covers area, and expect $5,500 to $10,000, or $6.43 to $11.70 per square foot. A bond coat is legitimate over sound plaster and a false economy over delamination. The methods are in [delamination: repair options](https://poolresurfacingguide.com/delamination-repair/), prevention is in [delamination: how to prevent it](https://poolresurfacingguide.com/delamination-prevention/), and the full finish range is in [pool resurfacing cost](https://poolresurfacingguide.com/pool-resurfacing-cost/).