# Pool tile replacement cost

> What it costs to replace waterline tile, step tile, and trim, how tile type changes the price, and when to do it alongside a resurface.

Canonical: https://poolresurfacingguide.com/pool-tile-replacement-cost/

Last updated: 2026-11-09

Pool tile replacement costs $1,500 to $5,000 for a 90 foot waterline band, which works out to roughly $17 to $56 per linear foot. The tile itself is a small part of that. Removal, surface preparation, drain and refill, and the labour of setting small pieces in a level line are what drive the price, and they are also why the job is much cheaper when it happens during a resurface.

## What the job covers

Pool tile replacement is the removal of existing waterline or trim tile, preparation of the substrate, and installation of new tile with thinset, grout, and sealant at the transitions. It covers the band at the waterline, tile on steps and benches, and trim around skimmers, lights, and the spa spillway.

It does not cover the plaster, and it does not fix a leaking shell. Tile is a decorative and protective layer; the waterproofing underneath is what keeps water in.

## The arithmetic

On a 15 by 30 foot pool the perimeter is 90 feet. A standard 6 inch waterline band covers 0.5 square feet per linear foot, so the tiled area is 90 × 0.5 = 45 square feet.

| Component | Low | High |
|---|---|---|
| Tile and setting materials (45 sq ft) | $540 | $2,025 |
| Removal of old tile | $300 | $800 |
| Drain, prep, and refill | $300 | $800 |
| Step, bench, and trim tile | $300 | $1,500 |
| **Total** | **$1,440** | **$5,125** |

Rounded, that is the $1,500 to $5,000 range. Per linear foot of waterline, $1,500 ÷ 90 = $17 and $5,000 ÷ 90 = $56.

Two variables move the total most. Tile choice sets the material line: $12 per square foot ceramic and $45 per square foot glass are a $1,485 difference across 45 square feet. And whether the pool is already drained decides whether you pay for a drain and refill twice.

## Tile types and what they cost installed

| Tile | Installed per sq ft | Notes |
|---|---|---|
| Ceramic | $12-$25 | Widest choice, glazed, frost-sensitive |
| Porcelain | $18-$32 | Denser, more frost- and chemical-resistant |
| Glass | $25-$45 | Colour depth, shows scale, needs careful grout |
| Stone or travertine | $20-$50 | Natural variation, needs sealing |

Glass tile looks best in clear water and shows calcium scale along the waterline faster than ceramic. Stone moves with temperature and needs periodic sealing. Porcelain is the practical middle: it tolerates freeze-thaw and pool chemistry without much fuss.

## Waterline tile vs full tile

Most pools have tile only at the waterline and on steps. A full-tile pool, where the entire interior is tiled, is a different budget entirely — $15 to $40 per square foot across the whole 855 square feet, or roughly $12,800 to $34,200, and that is before the plaster or render beneath it. It is a premium finish, not a maintenance item.

For most homeowners the decision is narrower: replace the waterline band now, or wait until the pool is drained for a resurface. If the plaster has three or more years left, replacing tile on its own is reasonable. If a resurface is imminent, wait and do both.

## When tile needs replacing

**Missing or loose pieces.** Tile that has popped off leaves the substrate exposed to water. That is a repair, not a cosmetic issue.

**Failed grout.** Crumbling grout at the waterline lets water behind the tile, and the bond coat fails next. Regrouting is cheaper than retiling if caught early.

**Persistent scale on the tile line.** Scale that returns within weeks of cleaning usually means the tile surface is etched. Replacing it is more reliable than repeated acid washing. [Acid wash pool cost](https://poolresurfacingguide.com/acid-wash-pool-cost/) covers what that treatment can and cannot do.

**Design age.** Small 1 inch mosaic in a 1980s colour is the most common reason homeowners replace tile that is technically sound.

## Doing tile during a resurface

1. Decide the tile before the crew starts, not during. Orders take time and a late change delays the whole job.
2. Have the old tile and the old finish removed in the same pass, so the substrate is exposed once.
3. Check the waterproofing and the bond coat before any tile goes on. Tile over a failed substrate fails with it.
4. Set the waterline level precisely. A 1/8 inch drift over 90 feet is visible from the deck every day afterward.
5. Grout, cure, and seal before the pool is refilled, and keep the water level below the tile line during the first cure period.

Timing tile with a resurface is where the savings are. A $3,000 tile job done during a $6,000 replaster adds $3,000 to that project. Done separately six months later, it adds a drain, a refill, and a mobilisation charge on top. [Pool replastering cost](https://poolresurfacingguide.com/pool-replastering-cost/) shows the finish side of the same project, and [pool coping replacement cost](https://poolresurfacingguide.com/pool-coping-replacement-cost/) covers the edge, which is usually done at the same time.

## Repair or replace

Cracked or missing pieces can be replaced individually, typically $150 to $400 for a small repair call including materials and a few hours of labour. Regrouting the waterline band is cheaper again. Once more than about a fifth of the band is loose, or the substrate behind it feels soft, individual repairs stop making sense. The break-even point is visible in the pattern: tile that pops off again within a year of being patched is telling you the bond coat is gone, and patching will keep costing money until the band is replaced.

## The short version

Expect $1,500 to $5,000 for waterline tile on a typical pool, or $17 to $56 per linear foot. Ceramic sits at the bottom, glass and stone at the top, porcelain in the middle. The cheapest time to replace tile is while the pool is drained for a resurface. The most expensive time is as an emergency, after a tile has fallen off and water has been getting behind the band for a season.