# Quartz vs fibreglass: aggregate or membrane

> Quartz costs $6,000 to $12,000 and lasts 10 to 15 years; fibreglass costs $5,000 to $12,000 and lasts 10 to 15. One is troweled, one is bonded.

Canonical: https://poolresurfacingguide.com/quartz-vs-fibreglass/

Last updated: 2026-11-09

Quartz and fibreglass occupy the same price band, **$5,000 to $12,000**, and the same life band, 10 to 15 years. Per year that is $333 to $1,200 either way. The choice is not financial. It is whether you want a troweled aggregate with a fine grain, or a bonded membrane with a smooth, non-porous surface.

## Troweled versus bonded

Quartz is a cement finish with a fine crushed aggregate, troweled onto the shell and sanded to a close surface. It is part of the cementitious family, and it wears the way plaster wears, only more slowly.

Fibreglass is a glass-reinforced plastic coating applied in layers with a gelcoat on top. It bonds as a membrane, and the surface is the gelcoat rather than the substrate.

One is a surface you could sand back and re-trowel. The other is a coating that is either sound or lifting.

## Price and life

| | Quartz | Fibreglass |
|---|---|---|
| Installed | $6,000 - $12,000 | $5,000 - $12,000 |
| Per square foot, 855 sq ft | $7.02 - $14.04 | $5.85 - $14.04 |
| Expected life | 10 - 15 years | 10 - 15 years |
| Cost per year | $400 - $1,200 | $333 - $1,200 |
| Surface | Fine grain | Smooth gelcoat |
| Repair | Patch and blend | Specialist resin |
| Fails by | Erosion | Dulling or lifting |

The per-year figures are division. Quartz: $6,000 ÷ 15 = $400, $12,000 ÷ 10 = $1,200. Fibreglass: $5,000 ÷ 15 = $333, $12,000 ÷ 10 = $1,200.

The only gap is at the low end, where fibreglass is $67 per year cheaper. That is not a decision-making difference; it is a rounding error against the feel of the surface.

## Feel and appearance

Fibreglass is the smoother of the two and stays that way. It does not chalk, and the gelcoat does not roughen with age. Underfoot it is slick unless a texture has been added, which is the main complaint at the steps.

Quartz has a fine grain that most owners describe as smooth, but it is not gelcoat smooth. It is closer to a polished stone than to glass, and it becomes slightly rougher as the cement matrix wears.

Neither has the coarse texture of pebble. If grip is the priority, the comparison is [quartz vs pebble](https://poolresurfacingguide.com/quartz-vs-pebble/).

## Chemistry and wear

Both want pH 7.2 to 7.8, alkalinity 80 to 120 ppm, and calcium 250 to 400 ppm. The response to drift is different.

Quartz is affected like plaster: low pH dissolves the cement matrix and leaves the aggregate proud, and high pH scales the surface. The damage is visible as a change in texture.

Fibreglass is affected more slowly, because the gelcoat is not calcium-based. Low pH still dulls it and eventually breaks it down, but a season of drift does less visible damage than it would on quartz.

That is the reason fibreglass appears in rental pools and holiday lets, where chemistry is not watched as closely.

## Repair and colour

Quartz wins on repair. A chip or a worn patch can be filled with a matching mix and blended, and the repair is often invisible on a speckled surface.

Fibreglass repair is a resin and gelcoat job. The patch is sound but rarely matches, and the difference is visible on a light finish. On a pool with children or dogs, that matters.

Colour is the other consideration. Quartz carries its colour in the aggregate and the cement, and it is available in a wide range. Fibreglass gelcoat is a solid colour, and it fades under UV in a way that quartz does not. A faded gelcoat can be recoated, but that is a specialist job at a specialist price, and it is not a patch.

## What the surface does to the water

A non-porous finish changes the way the pool behaves as much as the way it looks. Fibreglass does not absorb water, so it does not affect the calcium balance and it does not need the same acid washing that a cement finish does to remove scale and metal marks.

Quartz does interact with the water. It contributes a little calcium as it cures, and it holds scale and metal staining at the surface in the way plaster does. That is why quartz pools are more often acid washed than fibreglass ones, and why the maintenance routine differs even when the chemistry targets are identical.

Neither difference is decisive on its own, but together they explain why owners who dislike pool maintenance tend toward fibreglass and owners who want a repairable surface tend toward quartz.

## Five steps to choose

1. Decide whether you want a grain or a glass-smooth surface.
2. Have the shell assessed for hollow areas before either is quoted.
3. Ask what preparation each includes.
4. Compare the repair options, not just the installation.
5. Look at a five-year-old example of each.

Step five is the one that shows the difference. A new quartz pool and a new fibreglass pool look similar; five years later the quartz has a patina and the fibreglass is either unchanged or lifting.

## The short version

Same price, same life, different surface. Quartz is a hard, grainy, repairable aggregate; fibreglass is a smooth, non-porous membrane that is harder to patch. Choose on feel and on the shell. Prices are in [quartz cost](https://poolresurfacingguide.com/quartz-cost/) and [fibreglass cost](https://poolresurfacingguide.com/fibreglass-cost/), and the plaster baseline is in [plaster cost](https://poolresurfacingguide.com/plaster-cost/).